1. the maximum discharge current Imax 160kA or the maximum non - exit impact current limp 50kA;
2. the design of low pressure sense makes the residual pressure of the whole protection loop very low;
3. the power frequency removal current is less than 3A, and the opening time is 0.1s/3A;
4. particularly appropriate application channel design to ensure that the circuit breaker still has the corresponding capability of lightning protection after the opening of the circuit breaker.
5. modular design upgrading and installation, easy to install, maintenance free;
6. Remote switching operation (selection);
7. remote warning function, the first time after the opening of the signal, prompting the closing operation or replacement (selection).
Electrical parameters | technical parameter |
Rated working voltage Ue | 220VAC |
Maximum impingement current | - |
Maximum discharge current | Imax 80kA |
Power frequency current stripping value li | <3A |
Opening time Ti | 0.1s/3A |
Post opening lightning discharge capacity | limp 60kA |
General parameters | |
Outer size (width * height * depth) | 108X90X74(4P) |
Electrical life | ≥5000次 |
Shell protection grade | IP20 |
work environment | -40~+70℃,relative humidity<95%(25℃Following) |
Installation method | 35mm Standard track |
Lightning Arrester And Varistor Factory:
Wenzhou Banqiao four Banqiao industrial district, Zhejiang, China
TEL:0577-62625686
Fax:0577-62625796
Surge Protector Factory:
Feilong Industrial Park, No. 688 Station Road, Liushi Town, Yueqing, Zhejiang
TEL:0577-62623666
Fax:0577-62626686